"Y" Forged
F800 A105
STRAINERS
Designed to ANSI B16.34 the strainer bodies are produced with a superiorwallthickness for corrosion allowance.Standard stainers are equipped with screens for the average service of mostmediums ( steam, gas, air, oil, chemicals , ect. )
   
 
LIMITING CONDITIONS (according to ISO 6552)
According to the body rating ( ANSI B16.34 )
F800 "ANSI 800
OTHER RATINGS ON REQUEST
 
Sizes: 3/8 " ½ " ¾ " 1 " 1½ " 2

Connections: Screwed ANSI B1.20.1 (NPT) / BS21 (BSP)
Buttweld ANSI B16.25
Socket Welding ANSI B16.11
Flanged ANSI / UNI / DIN
 


All strainers should be mounted as close as possible to the valve or machinery which they are being installed to protect. It is important to ensure that the strainer installed with the flow following the same direction as the flow direction arrow cast onto the strainer body. ,For mounting in horizontal or inclined pipelines, ensure that the screen housing is always mounted below the pipeline. "Y" strainers should never be installed in vertical pipelines in the upward flow condition. ( see below )

 
 

Size
DRAIN PLUG
S
H
H1
C
Weight
UNI-DIN
SF KG
150#
SF  KG
300#
SF  KG
600#
SF  KG
3/8 ¼ 90 60 85 41 1 - - - - - - - -
½ ¼ 90 60 85 41 1 150 2.6 165 2.3 165 2.8 165 3.2
¾ ¼ 110 75 100 46 1.2 170 4 191 3.2 191 4.3 191 4.7
1 ¼ 130 93 140 56 2 200 4.4 216 4.2 216 5.3 216 5.8
¼ 180 144 200 85 6 240 11 241 9.7 241 15 241 12.9
2 ½ 185 140 200 100 7 230 13 292 12 292 15 292 16.3
STANDARD PERFORATIONS 0.8mm SPECIAL PERFORATIONS ON REQUEST Dimension : S, H , H1 , C , are in millimeters ( mm)

 

 
POS.
DESCIPTION MATERIALS SPARES
1BodyASTM A105
2ScreenS.S.
3PlugASTM A105
4Gasket316 / GRAPHITE
5Drain plugASTM A105
6StudsASTM A193 B7
6NutsASTM A194 2H
7FlangeASTM A105
POS.6 (BOLTED COVER) : F800 2 ONLY OTHER MATERIALS ON REQUEST