Cast Steel "Y" Type Strainers
C900 CF8M PRESSURE SEAL
STRAINERS
Designed to ANSI B16.34 the strainer bodies are produced with a superiorwallthickness for corrosion allowance.Standard stainers are equipped with screens for the average service of mostmediums ( steam, gas, air, oil, chemicals , ect. )
   
 
LIMITING CONDITIONS (according to ISO 6552)
According to the body rating ( ANSI B16.34 )
C900 " ANSI 900
OTHER RATINGS ON REQUEST
 
Sizes: 16

Connections: Buttweld ANSI B16.25
Flanged ANSI B 16.5
 
Size
16
SRTJ
1140
SRF
1092
S
1092
H
865
H1
1340
STANDARD PERFORATIONS 1.5 mmSPECIAL PERFORATIONS ON REQUEST. DRAIN PLUG SIZE ¾ Dimension : SRF , S , H, H1 are in millimeters ( mm)

 


All strainers should be mounted as close as possible to the valve or machinery which they are being installed to protect. It is important to ensure that the strainer installed with the flow following the same direction as the flow direction arrow cast onto the strainer body. ,For mounting in horizontal or inclined pipelines, ensure that the screen housing is always mounted below the pipeline. ,œ Y œ " strainers should never be installed in vertical pipelines in the upward flow condition. ( see above )

 

POS.
DESCIPTION MATERIALS SPARES
1 Body ASTM A351 CF8M
2 Screen S.S. 316 X
3 Gasket A182 F316 X
4 Drain plug S.S. 316