Temporary
FT1
STRAINERS
Conical type temporary strainers are designed for the efficent removal of solids in new pipeline start up service.
They are compact and rugged and can be installed either vertically or horizontally.
They can be manufactured using any kind or wire mesh or perforated plate , in carbon and stainless steel or exotic alloys.
Given dimensions are for reference purpose only.
Strainers may be manufactured to any customer’s standard.
Strainers are designed to be installed between ANSI B16.5 flanges and meet FF , RF and RTJ facings.
 
   
 
ASSEMBLY INSTRUCTION
1) Insert the strainer between the two flanges ( 4 )
2) Make sure the two gasket are fitted on both sides
3) Tighten bolts ( 3 ) keeping the strainer ( 1 ) + gaskets ( 2 ) in the correct position
MAINTENANCE INSTRUCTIONS
1) Unscrew bolts ( 3 )
2) Remove the strainer ( 1 ) and clean or replace it
3) When re-assembling use new gaskets
 
Sizes: 1½ " 2 " 3 " 4 " 6 " 8 " 10 " 12 " 14 " 16 " 18 " 20 " 24




Size
2 3 4 6 8 10 12 14 16 18 20 24
D
73 92 127 157 216 270 324 381 412 470 534 584 692
H
60 80 120 150 230 300 350 400 450 500 550 600 650
L
70 70 70 80 100 100 110 110 120 130 130 140 150
C
20 20 20 20 20 20 20 20 20 20 20 20 20
S
3 3 3 3 5 5 5 5 5 7 7 7 7
A
33 48 75 100 150 200 250 300 332 383 434 485 587
B
20 26 44 60 89 118 149 175 194 224 250 285 300
Dimensions : D , H , L , C , S , A , B are in millimeters ( mm ) OTHER SIZES ON REQUEST
 
 

 

 
   
POS.
DESCIPTION MATERIALS SPARES
1 Ring CARBON STEEL
2 Perforated plate ASTM A240 304
OTHER MATERIALS AND DIMENSIONS ON REQUEST