Ball Float Compressed Air Traps
GY CF8M
MAIN FEATURES
Direct-acting float valve permits continuons drainage of water underchanging conditions of inlet pressure and load. Because valve is underwater during operation , air leakage is eliminated. Properly located itwill assure a supply of dr
   
 
LIMITING CONDITIONS (according to ISO 6552)
Steam Trap ratingANSI 300
PMA: Max allowable pressure50 bar
TMA: max allowable temperature410°C
PMO: max working pressure40 bar
TMO: max working temperature370°C
Max. Differential pressure ( GY 5 )5 bar
Max. Differential pressure ( GY 14 )14 bar
Max. Differential pressure ( GY 25 )25 bar
Max. Differential pressure ( GY 40 )40 bar
 
Sizes: ½ " ¾ " 1

Connections: SCREWED ANSI B1.20.1 (NPT) / BS21 (BSP)
SOCKET WELD ANSI B16.11
FLANGED ANSI 150#/300#/600#/UNI/DIN
Applications: ater entering the trap lifts the float and opens the discharge valve. This adjusts the valve opening so that there is a continuons flow of water througt the trap. There are no pressure fluctuations as the trap opens and closes. NOTE An eualizing line should be installed. This will eualize the pressure to the trap , eliminate gas binding and permit a smooth uninterrupted flow of condensate to the trap, the eualizing line connection to the tank must be above the level of any possible accumulation of condensate.
 
Size
S
A
B
C
Weight
UNI-DIN
SF KG
150#
SF  KG
300#
SF  KG
600#
SF  KG
½165213711801121113.320513.321113.522214
¾165213711801121513.720713.721114.623015
1165213711801121514.521014.521415.223015.5
 
 
 
   
POS.
DESCIPTION MATERIALS SPARES
1BodyASTM A351 CF8M
2CoverASTM A351 CF8M
3Gasket316 / GRAPHITEX
4SeatAISI 316X
5ValveAISI 316X
6LeverAISI 316X
7Ball floatAISI 316X
8PlugSTAINLESS STEEL
9BoltsASTM A193 B8