Tee
FS 600
STRAINERS
Designed to ANSI B16.34 the strainer bodies are produced with a superiorwallthickness for corrosion allowance.Standard stainers are equipped with screens for the average service of mostmediums ( steam, gas, air, oil, chemicals , ect. )
       
 
Sizes: 2"3"4"6"8"10"12"16"18"20"24
Connections: Buttweld ANSI B16.25
Flanged ANSI B 16.5
Size (Inches) 2 3 4 6 8 10 12 16 18 20 24
S
127 172 210 286 356 432 508 610 686 762 864
SF
268 332 382 483 579 668 769 903 1004 1086 1201
A
158 197 225 281 333 385 438 511 565 609 673
Dimension : , S , A are in millimeters ( mm)

 


All strainers should be mounted as close as possible to the valve or machinery which they are being installed to protect. It is important to ensure that the strainer installed with the flow following the same direction as the flow direction arrow cast onto the strainer body. ,For mounting in horizontal or inclined pipelines, ensure that the screen housing is always mounted below the pipeline. ,œ Y œ " strainers should never be installed in vertical pipelines in the upward flow condition. ( see above )

 
POS.
DESCIPTION MATERIALS SPARES
1 Body ASTM A234 WPB
2 Flange ASTM A105
3 Blind flange ASTM A105
4 Basket S.S. 304 X
5 Frame S.S. 304
6 Guide rods CARBON STEEL
7 Gasket CAF X
8 Bolts ASTM A193 B7
9 Nuts ASTM A194 2H
OTHER MATERIALS AND DIMENSIONS ON REQUEST